Installation of Kwik Seal Compression Manhole Gasket [Video]

June 25, 2019 0 Comment

Installing a compression manhole gasket for a cored or cast-in hole is a very simple process and on today’s show, Midwest Territory Manager, Dan Brundage, joins us to show us just how easy it really is.

Dan covers Indiana, Kentucky, Michigan, Illinois and Missouri.

What is a Kwik Seal Compression Seal

Kwik Seal is a compression manhole gasket that meets or exceeds the requirements of ASTM C 923 and uses no special tools for installation. Contractors will find this to be very beneficial in the field because they don’t have to go looking for that special wrench or fitting to insert the pipe.

The installation process is as simple as 1… 2… 3…

How to Install Kwik Seal

Installing the Kwik Seal for a precast producer is as simple as using our spray adhesive and inserting the gasket. Out in the field, the contractor has a few more steps to connect the pipe to the manhole. So if you’re a contractor, follow these steps:

  1. Clean surface of hole to prep and use our spray adhesive
  2. Fold gasket into heart shape and push into hole
  3. Bevel pipe and lubricate the gasket and beveled end of the pipe to insert

After installation of the gasket, ensure that the lip of the seal is flush with the manhole to prevent the gasket from flipping inward.

 

 

Where to use Kwik Seal and Quality Standards

You can use the Kiwk Seal in a variety of different types of structures for storm water or waste water systems such as:

  • Manholes
  • Wet wells
  • Square pump and lift stations
  • Storm water structures
  • On-site treatment structures
  • Junction chambers
  • Grease interceptors

And to ensure that your gasket is performing to the highest standard possible, the Kwik Seal meets and/or exceeds all requirements of ASTM C 923, including physical properties of materials and performance testing.

If you're not using the Kwik Seal in your production process just yet, feel free to watch this testimonial from one of our customers on why he thinks the Kwik Seal is the best solution for his company.

18Jun 2019
Boot Connector Inspection – What to look for when the gasket arrives

Quality checks on boot connector’s always occur at Press-Seal before a gasket or “boot” ever leaves our building. But to ensure that our customers are always getting the best possible product, we’ve invited our Quality Manager, Brad Carpenter onto our show to discuss some of these key inspections […]

07Jun 2019
2 Compression Boot Connectors for Stormwater Systems

Compression boot connectors for stormwater systems are a simple way for contractors to connect pipes to manholes.

21May 2019
Boot Connector Considerations

When using boot connector's in manholes, there are a variety of considerations that must be taken into account when deciding which boot is the best fit (pun intended) for your project.

08Nov 2018
How To Install A Kwik Seal

 INTRODUCTION: The Kwik Seal is a simple all-rubber compression-type seal that makes a flexible watertight connection between pipes and concrete structures.